Who DOESN’T need a skull with red glowing eyes??
Deets
Not too much to say here - this is just a fun little skull with glowing red eyes. I used a simple circuit consisting of a CR2032 battery connected to two 2.2V red LEDs via a SPST switch. The LEDs and wires are embedded in the epoxy cast of the skull, which I made using a silicone mold. I added some 3D-printed feet so I could keep the battery, battery holder, and switch on the exterior of the casting for service. To finish I used XTC-3D epoxy mixed with some black epoxy dye and gold powder.
 |
| Skull close-up |
 |
| Skull feet, battery, & switch |
 |
| Skull, skull, eyes of null |
